加载中…给MACD加了二条线,一条是压力线,一条是支撑线
(2014-01-26 19:12:59) | 分类： macd文档 |
给MACD加了二条线,一条是压力线,一条是支撑线
MACD上穿压力线后易暴涨
我将MACD的参数放大至 120
260
20
这样捉大黑马效果不错,因为参数大.一旦MACD上穿0,极易出大黑马
公式如下大家试试
DIFF:(EMA(C,120)-EMA(C,260)),linethick1,colorred;
DEA:EMA(DIFF,20),linethick1,Coloryellow;
MACD : 2*(DIFF-DEA), COLORSTICK;
金叉:CROSS(DIFF,DEA)*DEA,colorred;
死叉:CROSS(DEA,DIFF)*DEA ,ColorFFFF80;
上穿零:CROSS(DIFF,0),Coloryellow;
MACD上穿压力线后易暴涨
将下面公式加入主图可得主图压力与支撑线...............也可给MACD,KDJ,RSI加压力支撑线,但下面公式要改动一些............大家愿改,自已动手试着改一下吧...
N参数1---30均可
A1:=ref(h,N)=hhv(h,2*N+1);
B1:=filter(A1,N);
C1:=backset(B1,N+1);
D1:=filter(C1,n);{高点}
A2:=ref(l,N)=llv(l,2*N+1);
B2:=filter(A2,N);
C2:=backset(B2,N+1);
D2:=filter(C2,N);{低点}
E1:=(ref(llv(l,2*N),1)+ref(hhv(h,2*N),1))/2; E2:=(h+l)/2;{高低点出现在同一K线上时可作取舍}
H1:=(D1 AND not(D2 AND E1>=E2)) OR barstatus=2 OR barscount(c)=1;
L1:=(D2 AND not(D1 AND E1=E2);
X1:=ref(barslast(H1),1)+1; F1:=backset(H1 AND count(L1,X1)>0,llvbars
(if(L1,l,10000),X1));
G1:=F1>ref(F1,1); I1:=backset(G1,2); LD:=I1>ref(I1,1);{过滤后低点}
L2:=LD OR barstatus=2 OR barscount(c)=1;
X2:=ref(barslast(L2),1)+1; F2:=backset(L2 AND count(H2,X2)>0,hhvbars
(if(H2,h,0),X2));
G2:=F2>ref(F2,1); I2:=backset(G2,2); HD:=I2>ref(I2,1);{过滤后高点}
R1:=backset(barstatus=2,barslast(HD)+1);
S1:=R1>ref(R1,1); {前一高}
T1:=backset(barstatus=2,barslast(LD)+1);
U1:=T1>ref(T1,1); {前一低}
R2:=backset(S1,ref(barslast(HD),1)+2);
S2:=R2>ref(R2,1); {前二高}
T2:=backset(U1,ref(barslast(LD),1)+2);
U2:=T2>ref(T2,1); {前二低}
短期压力:drawline(S2,h,S1,h,1),Colorred,linethick2;
短期支撑:drawline(U2,l,U1,l,1),Colorgreen,linethick2;
N参数1---30均可
A1:=ref(h,N)=hhv(h,2*N+1);
B1:=filter(A1,N);
C1:=backset(B1,N+1);
D1:=filter(C1,n);{高点}
A2:=ref(l,N)=llv(l,2*N+1);
B2:=filter(A2,N);
C2:=backset(B2,N+1);
D2:=filter(C2,N);{低点}
E1:=(ref(llv(l,2*N),1)+ref(hhv(h,2*N),1))/2; E2:=(h+l)/2;{高低点出现在同一K线上时可作取舍}
H1:=(D1 AND not(D2 AND E1>=E2)) OR barstatus=2 OR barscount(c)=1;
L1:=(D2 AND not(D1 AND E1=E2);
X1:=ref(barslast(H1),1)+1; F1:=backset(H1 AND count(L1,X1)>0,llvbars
(if(L1,l,10000),X1));
G1:=F1>ref(F1,1); I1:=backset(G1,2); LD:=I1>ref(I1,1);{过滤后低点}
L2:=LD OR barstatus=2 OR barscount(c)=1;
X2:=ref(barslast(L2),1)+1; F2:=backset(L2 AND count(H2,X2)>0,hhvbars
(if(H2,h,0),X2));
G2:=F2>ref(F2,1); I2:=backset(G2,2); HD:=I2>ref(I2,1);{过滤后高点}
R1:=backset(barstatus=2,barslast(HD)+1);
S1:=R1>ref(R1,1); {前一高}
T1:=backset(barstatus=2,barslast(LD)+1);
U1:=T1>ref(T1,1); {前一低}
R2:=backset(S1,ref(barslast(HD),1)+2);
S2:=R2>ref(R2,1); {前二高}
T2:=backset(U1,ref(barslast(LD),1)+2);
U2:=T2>ref(T2,1); {前二低}
短期压力:drawline(S2,h,S1,h,1),Colorred,linethick2;
短期支撑:drawline(U2,l,U1,l,1),Colorgreen,linethick2;
我将MACD的参数放大至
这样捉大黑马效果不错,因为参数大.一旦MACD上穿0,极易出大黑马
公式如下大家试试
DIFF:(EMA(C,120)-EMA(C,260)),linethick1,colorred;
DEA:EMA(DIFF,20),linethick1,Coloryellow;
MACD : 2*(DIFF-DEA), COLORSTICK;
金叉:CROSS(DIFF,DEA)*DEA,colorred;
死叉:CROSS(DEA,DIFF)*DEA ,ColorFFFF80;
上穿零:CROSS(DIFF,0),Coloryellow;
这个MACD很不错............【DIF上穿多头.股价易暴涨】...............
DIF:EMA(CLOSE,12)-EMA(CLOSE,26),ColorFFFF80;
MACD:EMA(DIF,9),Coloryellow;
DEF:2*(DIF-MACD),COLORFFFF00,LINETHICK0;
DEA: EMA(DIF,9),Coloryellow;
0;
STICKLINE(DEF>=0 AND DEF>=REF(DEF,1),0,DEF,0.1,0),COLOR6058FF;
STICKLINE(DEF>=0 AND DEF< REF(DEF,1),0,DEF,0.1,0),colorFFB41E;
STICKLINE(DEF<0 AND DEF>=REF(DEF,1),0,DEF,0.1,0),COLORred;
STICKLINE(DEF<0 AND DEF< REF(DEF,1),0,DEF,0.1,0),COLORFFb41e;
多头:IF(DIF>=0 AND MACD>=0 OR (DIF<0 AND MACD>=0),1,0)*0.218,COLORFFBBFF,LINETHICK2;
DIF:EMA(CLOSE,12)-EMA(CLOSE,26),ColorFFFF80;
MACD:EMA(DIF,9),Coloryellow;
DEF:2*(DIF-MACD),COLORFFFF00,LINETHICK0;
DEA: EMA(DIF,9),Coloryellow;
0;
STICKLINE(DEF>=0 AND DEF>=REF(DEF,1),0,DEF,0.1,0),COLOR6058FF;
STICKLINE(DEF>=0 AND DEF< REF(DEF,1),0,DEF,0.1,0),colorFFB41E;
STICKLINE(DEF<0 AND DEF>=REF(DEF,1),0,DEF,0.1,0),COLORred;
STICKLINE(DEF<0 AND DEF< REF(DEF,1),0,DEF,0.1,0),COLORFFb41e;
多头:IF(DIF>=0 AND MACD>=0 OR (DIF<0 AND MACD>=0),1,0)*0.218,COLORFFBBFF,LINETHICK2;
喜欢
0
赠金笔
前一篇：支撑线的操作和主图及选股公式
后一篇：一年四倍(主图叠加)