加载中…ANSYS中如何查看接触单元之间的接触状态
(2013-05-12 22:05:07)ANSYS中如何查看接触单元之间的接触状态
方法一：
preprocessor>modeling>contact pair>工具栏 check contact status
例如显示：
1 CONTACT PAIR IS SELECTED
方法二：
general postprocessor>plot results>contour plot> nodel solu>contact >contact status
The possible values of STAT and OLDST are:
| 0 = Open and not near contact |
| 1 = Open but near contact |
| 2 = Closed and sliding |
| 3 = Closed and sticking |
喜欢
0
赠金笔
前一篇：连梁超筋解决措施
后一篇：ANSYS中如何保持量纲统一？