加载中…ABB_800xA学习笔记311：System_800xA_Control_6.0_AC_800M_Configuration100
(2024-01-16 08:14:50)
标签：
abb800xa配置手册功能和组件 |
分类： ABBDCS |
继续学习ABB
800xA配置手册第一章功能和组件，进入第208页。ABB这个手册听了一周左右没看了，还是觉得西门子的东西上手快一点。
Search and Navigation Settings
搜索和导航设置
The
Search and Navigation settings dialog box has settings for
executing the search and editing of the search
fields.
搜索和导航设置对话框有执行搜索的设置和搜索条目编辑。
Select Tools > Setup > Station >
Search and Navigation Settings to view
the Search and
Navigation settings dialog box.
通过选择工具>设置>站>搜索和导航设置来查看搜索和导航对话框。
Figure 88. The Search and Navigation
settings dialog with default settings
图88. 有默认设置的搜索和导航对话框
Rebuild the Search Data when
Opening Project
打开项目时重建搜索数据
When this option is checked, Control
Builder will rebuild search data when a
new project is
loaded in the Control Builder. This check box is, by default,
unchecked.
当勾选选项，Control
Builder将在加载新项目时重建搜索数据。该复选框默认不勾选。
Rebuild the Search Data when Going to
Online/Test Mode
当转到在线/测试模式时重建搜索数据
When
this option is checked, search data is rebuilt when Control Builder
is entering online
mode or test mode. This setting ensures that the search data is
consistent in
勾选此选项，当Control Builder进入在线模式或者测试模式，搜索数据重建。此设置可确保与脱机模式相比，联机和测试模式下的搜索数据是一致的。该复选框默认不勾选。
It
is recommended to normally have this check box
unchecked
建议通常取消选中此复选框。
Execute Search Instantly
即时执行搜索
When
this option is checked, the Search and Navigation dialog box will
instantly perform
a search when the dialog is accessed with the Search command, from
a
选中此选项后，当使用“搜索”命令从菜单或工具栏按钮访问对话框时，“搜索和导航”对话框将立即执行搜索，也就是说，用户不必按对话框中的“搜索”按钮。仅当要搜索的符号很明显时，才会执行搜索，即“搜索和导航”对话框中的“搜索：”和“搜索范围：”框都必须自动填充。默认情况下，此复选框处于选中状态。
Figure 89. Selection of the
AC800MStatus and the Search option
图89. 选择AC800MStatus和搜索选项
1. In the code
block, double click the AC800MStatus variable to select it.
在代码块，双击AC800MStatus变量选中它
2. Right click and
select Search, or go to the toolbar and select Edit > Search (or
Alt-F12).
右键电机选择搜索，或者转到工具栏选择编辑>搜索（或者ALt_F12)
Figure 90. The search result after
performing above steps.
图90. 执行上面步骤后的搜索结果
Allow editing of the Search Fields
in Online/Test Mode
允许在联机/测试模式下编辑搜索字段
When this option is checked, it
enables free editing in the Search field. It
is introduced
since the strings in the search fields are very sensitive in this
mode. A
选中此选项后，它将在“搜索”字段中启用自由编辑。之所以引入它，是因为搜索字段中的字符串在此模式下非常敏感。一个放错位置的字符会破坏搜索，“搜索范围”字段也区分大小写。默认情况下，此复选框处于未选中状态
Iterative searches in Online/Test
Mode
在线/测试模式下的迭代搜索
When this option is checked, the
searches made in Online/Test mode are
iterative, and the
search hits are presented in one pane. For details, see Search and
Navigation
选中此选项后，在联机/测试模式下进行的搜索是迭代的，并且搜索命中显示在一个窗格中。有关详细信息，请参阅第
391 页的“在线和测试模式下的搜索和导航”。默认情况下，此复选框处于选中状态。
喜欢
0
赠金笔