加载中…ABB_800xA学习笔记206：System_800xA_Control_6.0_AC_800M_Getting_Started_46附件B-3
(2023-12-03 21:04:00)
标签：
abbsystem_800xa_ac800m入门手册附录b许可证信息 |
分类： ABBDCS |
继续学习入门手册附录B，有关许可证。
Library Licenses
库许可证
The libraries – TCPHwLib, UDPHwLib,
and BurnerLib – require separate
licenses. These
licenses are checked after the download of the project to the
controller, in any
库
-
- The TCPHwLib is added to the Connected Libraries folder under required controller in Controllers folder.
TCPHwLib
库添加到连接到控制器文件夹中需要的控制器的库文件夹
- The UDPHwLib is added to the Connected Libraries folder under required controller in Controllers folder.
UDPHwLib库添加到控制器文件夹中需要的控制器的库文件夹
- The BurnerLib is added to the Connected Libraries folder under the required application in Applications folder.
BurnerLib库添加到控制器文件夹中需要的控制器的库文件夹
See
also Checking the CCP and Library License for a Controller on page
120.
见120页控制器的容量点和库许可证检查。
Checking the CCP and Library License for a
Controller
检查控制器的容量点和库许可证
To check the required CCP Count and
Library License for a controller that participated in the download:
要检查控制器所需的 CCP 计数和库许可证，请执行以下操作参与下载：
1.
在工厂资源管理器，转到控制结构，转到项目，选择控制器。在aspect面板显示控制器aspect。
Figure 69. (Left) Selected controller
in the Control Structure. (Right) The Controller aspect for the
selected controller (Controller_1).
图 69.
（左）在控制结构中选中控制器。（右）选中的控制器（控制器1）aspect
2. Click the
Controller aspect and select the Licensing tab in the aspect
preview pane. The current downloaded CCP value for the selected
controller, and the Library Licenses are displayed
(see Figure 70).
点击控制器aspect，选择aspect预览面板的许可证选项卡。显示当前选中的控制器的下载的CCP数值，和库许可证（见图70）
The Required points is validated
against the actual licenses available.
依据实际许可证点数验证需要的点数。
If the controller has not been
downloaded or if it is in Simulate Hardware state, the tab displays
information about this condition, and no CCP values or Library
Licenses are displayed.
如果控制器没有下载，或者它处于模拟硬件状态，选项卡显示此条件的信息，不显示CCP或者库许可证信息。
Figure 70. Example of the Licensing
tab in the Controller aspect of the selected controller
图 70. 选中的控制器aspect的许可证选项卡
The Licensing tab in Figure 70 shows
the required Controller Capacity Points (CCP) count and Library
Licenses for only the selected controller to which the application
is downloaded. To calculate the total CCP count, open the
Controller aspect of each controller that participated in the
download, and add the CCP counts.
图
70中的许可证信息显示了需要的控制器容量点数量和仅用于将应用程序下载到选定的控制器的库许可证数量。要计算全部的控制器容量点数量，打开每一个控制器的aspect，然后添加CCP计数。
喜欢
0
赠金笔