ABB800XA学习笔记122：systemtools_来自金沙江的小鱼

http://blog.sina.com.cn/u/1916946105

首页博文目录关于我

个人资料

微博

加好友发纸条

写留言加关注

博客等级：
博客积分：

博客访问：
关注人气：
获赠金笔：0支
赠出金笔：0支
荣誉徽章：

正文字体大小：大中小

ABB800XA学习笔记122：systemtools

(2023-11-06 20:30:04)

标签：

abb

8700xa

systemtools

系统网络

用户配置

分类： ABBDCS

继续学习。

System Network

系统网络

Follow the steps below to configure system network addresses:

按照下列步骤配置系统网络

1. Go to the Configuration Wizard and select System Administration, click Next.

转到配置向导，选择系统管理，点击下一步

2. Mark the system you want to start and click Next

选择你想要启动的系统，点击下一步

3. Select System Network, click Next.

选择系统网络，点击下一步

4. If using network filtering mark the Use network filtering check box. Enter the number of network areas used in the Number of network areas text field. Click Next.

如果使用网络筛选，请选中“使用网络筛选”复选框。输入网络区域数文本字段中使用的网络区域数。单击“下一步”。

For more information about RNRP and areas see System 800xA, Network, Configuration (3BSE034463*).

更多关于RNRP和区域的信息参阅System 800xA, Network, Configuration

图 25

5. In the next dialog box specify the primary and secondary network address for the first network area. If more than one network area was specified in the previous dialog box, one dialog box for each area will appear. Click Next.

在下一个对话框为第一个网络区域配置主和从网络地址。如果在前一个对话框有多于一个网络区域需要配置，每一个网络区域出现一个配置对话框。点击下一步。

图 26

6. Verify your settings in the Apply Settings dialog box, if the settings are ok, click Finish.

在“应用设置”对话框中验证您的设置，如果设置正常，单击 Finish。

Operator Workplace User Administration. The Users icon in the Configuration Wizard activates the User Administration dialog box.

操作员工作区用户管理。“配置向导”中的“用户”图标将激活“用户管理”对话框。

1. Open the Configuration Wizard.

打开配置向导

2. Select System Administration and click Next

选中系统管理，点击下一步

3. Select the system in which you want to configure users to and click Next. See Figure 16.

选中你想要配置系统的用户，点击下一步。见图16

4. Select Users, see Figure 17. The User Configuration dialog box is displayed, see Figure 27

选中用户，见图17. 显示用户配置对话框，见图27

图 27

The top window shows the IndustrialIT 800xA System users. Users can be added and deleted. To delete a user select the user in the top window and click Delete User. The Reset button is used to reset the group membership for a user to the state it was before any changes were made.

顶层窗口显示 IndustrialIT 800xA系统用户。用户能够添加和删除。在顶层的窗口选中要删除的用户，点击删除按钮。“重置”按钮用于将用户的组成员身份重置为进行任何更改之前的状态。

You must have administrator permissions to delete a user

你必须有管理员许可来删除用户

To add a Windows user to an System 800xA group follow the steps:

按照下面的步骤添加windows用户到系统800XA：

1. Click Add Windows Accounts

点击添加windows账户

2. The list of the Windows users of the selected domain are shown, see Figure 28. Select the Windows users you want to add to the System 800xA users and click Add.

将显示所选域的 Windows 用户列表，参见图 28。选择要添加到 System 800xA 用户的 Windows 用户，然后单击添加。

图 28

3. Repeat Step 2 to add more Windows users. Click OK

重复步骤 2 以添加更多 Windows 用户。单击“确定”

4. In the User Configuration dialog box, you can select the IndustrialIT 800xA groups of which a Windows user must be member, see Figure 27. Select Windows user in the top window and use the Remove and Add buttons to move IndustrialIT 800xA groups to the Member of field

在“用户配置”对话框中，可以选择 Windows 用户必须是其成员的 IndustrialIT 800xA 组，请参见图 27。在顶部窗口中选择“Windows 用户”，然后使用“删除”和“添加”按钮将 IndustrialIT 800xA 组移动到“成员”字段。

阅读┊ 收藏 ┊ 喜欢 ▼ ┊打印┊举报/Report

前一篇：ABB800XA学习笔记121：systemtools

后一篇：ABB800XA学习笔记123：systemtools

新浪BLOG意见反馈留言板　欢迎批评指正