OpenFOAM工具可以在终端输入命令 cd $FOAM_UTILITIES查看，标准小工具列表如下：

Pre-processing   前处理

applyBoundaryLayer

Apply a simplified boundary-layer model to the velocity and turbulence fields based on the 1/7th power-law

applyWallFunctionBoundaryConditions

Updates OpenFOAM RAS cases to use the new (v1.6) wall function framework

boxTurb

Makes a box of turbulence which conforms to a given energy spectrum and is divergence free

changeDictionary

Utility to change dictionary entries, e.g. can be used to change the patch type in the field and polyMesh/boundary files

dsmcInitialise

Initialise a case for dsmcFoam by reading the initialisation dictionarysystem/dsmcInitialise

engineSwirl

Generates a swirling flow for engine calulations

faceAgglomerate

(Currently no description)

foamUpgradeCyclics

Tool to upgrade mesh and fields for split cyclics

foamUpgradeFvSolution

Simple tool to upgrade the syntax of system/fvSolution::solvers

mapFields

Maps volume fields from one mesh to another, reading and interpolating all fields present in the time directory of both cases. Parallel and non-parallel cases are handled without the need to reconstruct them first

mdInitialise

Initialises fields for a molecular dynamics (MD) simulation

setFields

Set values on a selected set of cells/patchfaces through a dictionary

viewFactorGen

(Description not found)

wallFunctionTable

Generates a table suitable for use by tabulated wall functions

Mesh generation   网格生成

blockMesh

A multi-block mesh generator

extrudeMesh

Extrude mesh from existing patch (by default outwards facing normals; optional flips faces) or from patch read from file.

extrude2DMesh

Takes 2D mesh (all faces 2 points only, no front and back faces) and creates a 3D mesh by extruding with specified thickness

extrudeToRegionMesh

Extrude faceZones into separate mesh (as a different region), e.g. for creating liquid film regions

snappyHexMesh

Automatic split hex mesher. Refines and snaps to surface

Mesh conversion  网格转换

ansysToFoam

Converts an ANSYS input mesh file, exported from I-DEAS, to OpenFOAM format

cfx4ToFoam

Converts a CFX 4 mesh to OpenFOAM format

datToFoam

Reads in a datToFoam mesh file and outputs a points file. Used in conjunction with blockMesh

fluent3DMeshToFoam

Converts a Fluent mesh to OpenFOAM format

fluentMeshToFoam

Converts a Fluent mesh to OpenFOAM format including multiple region and region boundary handling

foamMeshToFluent

Writes out the OpenFOAM mesh in Fluent mesh format

foamToStarMesh

Reads an OpenFOAM mesh and writes a PROSTAR (v4) bnd/cel/vrt format

foamToSurface

Reads an OpenFOAM mesh and writes the boundaries in a surface format

gambitToFoam

Converts a GAMBIT mesh to OpenFOAM format

gmshToFoam

Reads .msh file as written by Gmsh

ideasUnvToFoam

I-Deas unv format mesh conversion

kivaToFoam

Converts a KIVA grid to OpenFOAM format

mshToFoam

Converts .msh file generated by the Adventure system

netgenNeutralToFoam

Converts neutral file format as written by Netgen v4.4

plot3dToFoam

Plot3d mesh (ascii/formatted format) converter

sammToFoam

Converts a STAR-CD (v3) SAMM mesh to OpenFOAM format

star3ToFoam

Converts a STAR-CD (v3) PROSTAR mesh into OpenFOAM format

star4ToFoam

Converts a STAR-CD (v4) PROSTAR mesh into OpenFOAM format

tetgenToFoam

Converts .ele and .node and .face files, written by tetgen

writeMeshObj

For mesh debugging: writes mesh as three separate OBJ files which can be viewed with e.g. javaview

Mesh manipulation 网格处理

attachMesh

Attach topologically detached mesh using prescribed mesh modifiers

autoPatch

Divides external faces into patches based on (user supplied) feature angle

checkMesh

Checks validity of a mesh

createBaffles

Makes internal faces into boundary faces. Does not duplicate points, unlikemergeOrSplitBaffles

createPatch

Utility to create patches out of selected boundary faces. Faces come either from existing patches or from a faceSet

deformedGeom

Deforms a polyMesh using a displacement field U and a scaling factor supplied as an argument

flattenMesh

Flattens the front and back planes of a 2D cartesian mesh

insideCells

Picks up cells with cell centre ’inside’ of surface. Requires surface to be closed and singly connected

mergeMeshes

Merge two meshes

mergeOrSplitBaffles

Detects faces that share points (baffles). Either merge them or duplicate the points

mirrorMesh

Mirrors a mesh around a given plane

moveDynamicMesh

Mesh motion and topological mesh changes utility

moveEngineMesh

Solver for moving meshes for engine calculations

moveMesh

Solver for moving meshes

objToVTK

Read obj line (not surface!) file and convert into vtk

polyDualMesh

Calculate the dual of a polyMesh. Adheres to all the feature and patch edges

refineMesh

Utility to refine cells in multiple directions

renumberMesh

Renumbers the cell list in order to reduce the bandwidth, reading and renumbering all fields from all the time directories

rotateMesh

Rotates the mesh and fields from the direcion   to the direction 

setSet

Manipulate a cell/face/point/ set or zone interactively

setsToZones

Add pointZones/faceZones/cellZones to the mesh from similar namedpointSets/faceSets/cellSets

singleCellMesh

Removes all but one cells of the mesh. Used to generate mesh and fields that can be used for boundary-only data. Might easily result in illegal mesh though so only look at boundaries in paraview

splitMesh

Splits mesh by making internal faces external. Uses attachDetach

splitMeshRegions

Splits mesh into multiple regions

stitchMesh

’Stitches’ a mesh

subsetMesh

Selects a section of mesh based on a cellSet

topoSet

Operates on cellSets/faceSets/pointSets through a dictionary

transformPoints

Transforms the mesh points in the polyMesh directory according to the translate, rotate and scale options

zipUpMesh

Reads in a mesh with hanging vertices and zips up the cells to guarantee that all polyhedral cells of valid shape are closed

Other mesh tools 其他网格工具

autoRefineMesh

Utility to refine cells near to a surface

collapseEdges

Collapse short edges and combines edges that are in line

combinePatchFaces

Checks for multiple patch faces on same cell and combines them. These result from e.g. refined neighbouring cells getting removed, leaving 4 exposed faces with same owner

modifyMesh

Manipulates mesh elements

PDRMesh

Mesh and field preparation utility for PDR type simulations

refineHexMesh

Refines a hex mesh by 2x2x2 cell splitting

refinementLevel

Tries to figure out what the refinement level is on refined cartesian meshes. Run beforesnapping

refineWallLayer

Utility to refine cells next to patches

removeFaces

Utility to remove faces (combines cells on both sides)

selectCells

Select cells in relation to surface

splitCells

Utility to split cells with flat faces

Post-processing graphics   后处理

ensightFoamReader

EnSight library module to read OpenFOAM data directly without translation

fieldview9Reader

Reader module for Fieldview 9 to read OpenFOAM mesh and data

Post-processing data converters  后处理数据转换器

foamDataToFluent

Translates OpenFOAM data to Fluent format

foamToEnsight

Translates OpenFOAM data to EnSight format

foamToEnsightParts

Translates OpenFOAM data to Ensight format. An Ensight part is created for eachcellZone and patch

foamToFieldview9

Write out the OpenFOAM mesh in Version 3.0 Fieldview-UNS format (binary)

foamToGMV

Translates foam output to GMV readable files

foamToTecplot360

Tecplot binary file format writer

foamToVTK

Legacy VTK file format writer

smapToFoam

Translates a STAR-CD SMAP data file into OpenFOAM field format

Post-processing velocity fields  速度场后处理

Co

Configurable graph drawing program

enstrophy

Calculates and writes the enstrophy of the velocity field U

flowType

Calculates and writes the flowType of velocity field U

Lambda2

Calculates and writes the second largest eigenvalue of the sum of the square of the symmetrical and anti-symmetrical parts of the velocity gradient tensor

Mach

Calculates and optionally writes the local Mach number from the velocity field U at each time

Pe

Calculates and writes the Pe number as a surfaceScalarField obtained from field phi

Q

Calculates and writes the second invariant of the velocity gradient tensor

streamFunction

Calculates and writes the stream function of velocity field U at each time

uprime

Calculates and writes the scalar field of uprime ( )

vorticity

Calculates and writes the vorticity of velocity field U

Post-processing stress fields  压力场后处理

stressComponents

Calculates and writes the scalar fields of the six components of the stress tensor sigmafor each time

Post-processing scalar fields  标量场后处理

pPrime2

Calculates and writes the scalar field of pPrime2 ( ) at each time

Post-processing at walls  壁面后处理

wallGradU

Calculates and writes the gradient of U at the wall

wallHeatFlux

Calculates and writes the heat flux for all patches as the boundary field of avolScalarField and also prints the integrated flux for all wall patches

wallShearStress

Calculates and writes the wall shear stress, for the specified times

yPlusLES

Calculates and reports yPlus for all wall patches, for the specified times

yPlusRAS

Calculates and reports yPlus for all wall patches, for the specified times when using RAS turbulence models

Post-processing turbulence  湍流后处理

createTurbulenceFields

Creates a full set of turbulence fields

R

Calculates and writes the Reynolds stress R for the current time step

Post-processing patch data   边界数据后处理

patchAverage

Calculates the average of the specified field over the specified patch

patchIntegrate

Calculates the integral of the specified field over the specified patch

Post-processing Lagrangian simulation  后处理Lagrangian计算

particleTracks

Generates a VTK file of particle tracks for cases that were computed using a tracked-parcel-type cloud

steadyParticleTracks

Generates a VTK file of particle tracks for cases that were computed using a steady-state cloud NOTE: case must be re-constructed (if running in parallel) before use

Sampling post-processing 取样后处理

probeLocations

Probe locations

sample

Sample field data with a choice of interpolation schemes, sampling options and write formats

Miscellaneous post-processing  其他后处理工具

dsmcFieldsCalc

Calculate intensive fields (U and T) from averaged extensive fields from a DSMC calculation

engineCompRatio

Calculate the geometric compression ratio. Note that if you have valves and/or extra volumes it will not work, since it calculates the volume at BDC and TCD

execFlowFunctionObjects

Execute the set of functionObjects specified in the selected dictionary (which defaults tosystem/controlDict) for the selected set of times. Alternative dictionaries should be placed in the system/ folder

foamCalc

Generic utility for simple field calculations at specified times

foamListTimes

List times using timeSelector

pdfPlot

Generates a graph of a probability distribution function

postChannel

Post-processes data from channel flow calculations

ptot

For each time: calculate the total pressure

wdot

Calculates and writes wdot for each time

writeCellCentres

Write the three components of the cell centres as volScalarFields so they can be used in postprocessing in thresholding

Surface mesh (e.g. STL) tools  面网格工具

surfaceAdd

Add two surfaces. Does geometric merge on points. Does not check for overlapping/intersecting triangles

surfaceAutoPatch

Patches surface according to feature angle. Like autoPatch

surfaceCheck

(Currently no description)

surfaceClean

- removes baffles - collapses small edges, removing triangles. - converts sliver triangles into split edges by projecting point onto base of triangle

surfaceCoarsen

Surface coarsening using ’bunnylod’:

surfaceConvert

Converts from one surface mesh format to another

surfaceFeatureConvert

Convert between edgeMesh formats

surfaceFeatureExtract

Extracts and writes surface features to file

surfaceFind

Finds nearest face and vertex

surfaceInertia

Calculates the inertia tensor and principal axes and moments of a command line specified triSurface. Inertia can either be of the solid body or of a thin shell

surfaceMeshConvert

Convert between surface formats with optional scaling or transformations (rotate/translate) on a coordinateSystem

surfaceMeshConvertTesting

Converts from one surface mesh format to another, but primarily used for testing functionality

surfaceMeshExport

Export from surfMesh to various third-party surface formats with optional scaling or transformations (rotate/translate) on a coordinateSystem

surfaceMeshImport

Import from various third-party surface formats into surfMesh with optional scaling or transformations (rotate/translate) on a coordinateSystem

surfaceMeshInfo

Miscellaneous information about surface meshes

surfaceMeshTriangulate

Extracts triSurface from a polyMesh. Triangulates all boundary faces. Region numbers on triangles are the patch numbers of the polyMesh. Optionally only triangulates named patches

surfaceOrient

Set normal consistent with respect to a user provided ’outside’ point. If -inside the point is considered inside

surfacePointMerge

Merges points on surface if they are within absolute distance. Since absolute distance use with care!

surfaceRedistributePar

(Re)distribution of triSurface. Either takes an undecomposed surface or an already decomposed surface and redistribute it so each processor has all triangles that overlap its mesh

surfaceRefineRedGreen

Refine by splitting all three edges of triangle (’red’ refinement). Neighbouring triangles (which are not marked for refinement get split in half (’green’) refinement. (R. Verfuerth, ”A review of a posteriori error estimation and adaptive mesh refinement techniques”, Wiley-Teubner, 1996)

surfaceSmooth

Example of a simple laplacian smoother

surfaceSplitByPatch

Writes regions of triSurface to separate files

surfaceSplitNonManifolds

Takes multiply connected surface and tries to split surface at multiply connected edges by duplicating points. Introduces concept of - borderEdge. Edge with 4 faces connected to it. - borderPoint. Point connected to exactly 2 borderEdges. - borderLine. Connected list of borderEdges

surfaceSubset

A surface analysis tool which sub-sets the triSurface to choose only a part of interest. Based on subsetMesh

surfaceToPatch

Reads surface and applies surface regioning to a mesh. Uses boundaryMesh to do the hard work

surfaceTransformPoints

Transform (scale/rotate) a surface. Like transformPoints but for surfaces

Parallel processing  并行处理

decomposePar

Automatically decomposes a mesh and fields of a case for parallel execution of OpenFOAM

reconstructPar

Reconstructs a mesh and fields of a case that is decomposed for parallel execution of OpenFOAM

reconstructParMesh

Reconstructs a mesh using geometric information only

redistributeMeshPar

Redistributes existing decomposed mesh and fields according to the current settings in the decomposeParDict file

Thermophysical-related utilities 热物理相关工具

adiabaticFlameT

Calculates the adiabatic flame temperature for a given fuel over a range of unburnt temperatures and equivalence ratios

chemkinToFoam

Converts CHEMKIN 3 thermodynamics and reaction data files into OpenFOAM format

equilibriumCO

Calculates the equilibrium level of carbon monoxide

equilibriumFlameT

Calculates the equilibrium flame temperature for a given fuel and pressure for a range of unburnt gas temperatures and equivalence ratios; the effects of dissociation on O₂,H₂O andCO₂are included

mixtureAdiabaticFlameT

Calculates the adiabatic flame temperature for a given mixture at a given temperature

Miscellaneous utilities 其他工具

expandDictionary

Read the dictionary provided as an argument, expand the macros etc. and write the resulting dictionary to standard output

foamDebugSwitches

Write out all library debug switches

foamFormatConvert

Converts all IOobjects associated with a case into the format specified in thecontrolDict

foamInfoExec

Interrogates a case and prints information to stdout

patchSummary

Writes fields and boundary condition info for each patch at each requested time instance