方法一：（help）
Step 1:
Launch HyperMesh and set the RADIOSS (Bulk Data)
User Profile
Step 2: Import a Finite Element Model File
in HyperMesh
Step 3: Review Rigid Elements
Step 4: Setting up the Material and
Geometric Properties（建立材料和属性
| 13. |
Click the down arrow on the right of the entity shown in the
yellow box, select props from the
extended entity list. |
| 14. |
Click the yellow props button and
then check the box next to design and
nondesign. |
| 16. |
Make sure card image= is set
to PSHELL. |
The PSHELL card image for the design
component collector pops up.
| 18. |
Replace 0.300
in the T
field with 0.25. |
| 19. |
Click return to save the
changes to the card image. |
| 20. |
Click return to go to the
main menu. |
Step 5: Create EIGRL card (to request
the number of modes)（创建模态分析卡片）
| 2. |
Select the create subpanel,
using the radio buttons on the left-hand side of the panel. |
| 3. |
Click loadcol name = and
enter EIGRL. |
| 4. |
Click card
image= and select EIGRL from the
pop-up menu. |
| 6. |
For V2, enter the value
200.000. |
| 7. |
For ND, enter the value
6. |
| 8. |
Click return to save
changes to the card image. |
Step 6: Create Constraints at Bolt
Locations（创建约束）
Step 7: Create a Load Step to perform
Normal Modes Analysis（创建载荷步）
| 1. |
From the Analysis page, enter
the loadsteps
panel. |
| 2. |
Click name = and enter bolted. |
| 3. |
Click the type: switch and
select normal
modes from the pop-up menu. |
| 4. |
Check the box preceding SPC. |
An entry field appears to the right of SPC.
| 5. |
Click on the entry field and select constraints from the
list of load collectors. |
| 6. |
Check the box preceding METHOD(STRUCT). |
An entry field appears to the right of METHOD.
| 7. |
Click on the entry field and select EIGRL from the list
of load collectors. |
| 9. |
Click return to go to the
main menu. |
Submitting the Job
Step 8: Running Normal Modes
Analysis（提交分析）
Step 9: Load the Model and Result Files
into the Animation Window（后处理）
方法二：（.fem+.h3d）
参看附件视频
加载中，请稍候......
加载中…
