加载中…
个人资料
  • 博客等级:
  • 博客积分:
  • 博客访问:
  • 关注人气:
  • 获赠金笔:0支
  • 赠出金笔:0支
  • 荣誉徽章:
正文 字体大小:

QOS Queue(队列)

(2006-05-24 09:17:29)
分类: ~~~ Qos ~~~
一、思科队列技术除了FIFO外,还有:
 
1、Weight fair queuing(WFQ)
2、Flow-based weighted fair queuing
3、Class-based weighted fair queuing(CBWFQ)
4、Low latency queuing(LLQ)
 
 
二、WFQ
 
1、WFQ在2M以下的链路上(E1)被默认激活,在x.25或compressed ppp上默认为disable。E3或T3以上的局域网链路或串行链路不支持WFQ
 
2、WFQ分4种类型:flow-based,distributed,class-based,distributed class-based
 
3、WFQ配置示例(1):
r1(config-if)# fair-queue {congestion-discard-threshold}  //拥塞丢弃门限值,可取1-512,默认为64
 
4、WFQ配置示例(2):
r2(config)#interface serial 1
r2(config-if)# encapsulation frame-relay
r2(config-if)# fair-queue 128
r2(config-if)# bandwidth 56
 
 
 
三、Class-based Weighted Fair Queuing(CBWFQ)
 
1、接口带宽/类带宽=weight  //类带宽越大,权越小,优先级越高
 
2、配置示例(1):
step1(config)# class-map xxx
step1(config-cmap)# match access-group 101
step1(config-cmap)# match input-interface s0/0
step1(config-cmap)# match protocol tcp
step1(config-cmap)# match ip precedence tos
 
step2(config)# policy-map yyy
step2(config-pmap)# class xxx
step2(config-pmap-c)# bandwidth 64
step2(config-pmap-c)# queue-limit 128      //尾丢弃
step2(config-pmap-c)# random-detect 128  //WRED,随机早期检测
 
//默认情况下,class class-default 采用 flow-based WFQ
 
step3(config)# interface s0/0
step3(config-if)# service-policy output yyy
 
3、配置示例(2):
router(config)# access-list 101 permit udp host 10.10.10.10 host 10.10.10.20 range 16382 20000   //定义语音流量
router(config)# access-list 102 permit udp host 10.10.10.10 host 10.10.10.20 range 53000 56000  //定义视频流量
router(config)# class-map class1
router(config-cmap)# match access-group 101
router(config-cmap)# exit
router(config)# class-map class2
router(config-cmap)# match access-group 102
router(config-cmap)# exit
 
router(config)# policy-map policy1
router(config-pmap)# class class1
router(config-pmap-c)# bandwidth 3000 //3M带宽
router(config-pmap-c)# queue-limit 30  //尾丢弃,30个包
router(config-pmap-c)# exit
router(config-pmap)# class class2
router(config-pmap-c)# bandwidth 2000  //默认WFQ,64个包
 
 
四、LLQ
router(config)# policy yyy
router(config-pmap)# class xxx
router(config-pmap-c)# priority 30
 
在定义LLQ时,bandwidth,queue-limit,random-detect命令不能同时使用
 
 
 
 
 
 
 
 
 
 
 
 
vying:竞争的  vie的现在分词
perceive:察觉、看见、知觉
discriminator:鉴别器、辨别者、歧视者
interleave:交错
crest:波峰
through:波谷
 
 
 
 
 

0

阅读 收藏 喜欢 打印举报/Report
  

新浪BLOG意见反馈留言板 欢迎批评指正

新浪简介 | About Sina | 广告服务 | 联系我们 | 招聘信息 | 网站律师 | SINA English | 产品答疑

新浪公司 版权所有