//////// 3640 //////
int ethernet 0/0
ip addr 172.16.0.1 255.255.255.0
no ip redirects
no ip directed-broadcast
standby 1 priority 120 preempt //双机热备配置
standby 1 ip 172.16.0.100
standby 1 track serial 0/0 50 //双机热备配置
int s0/0
ip addr 10.10.10.1 255.255.255.0
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
int s0/1
ip addr 10.10.10.10 255.255.255.0
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
int s1/0
no ip addr
no ip directed-broadcast
shutdown
int s1/1
no ip addr
no ip directed-broadcast
shutdown
int s1/2
no ip addr
no ip directed-broadcast
shutdown
priority-group 5 //CQ 5 配置应用，配置定制队列CQ
int s1/3
no ip addr
no ip directed-broadcast
shutdown
priority-group 2 //PQ 2 配置应用，优先级队列
int s3/0
no ip addr
no ip directed-broadcast
ip route-cache policy //启动策略路由mytest的快速转发
ip policy route-map mytest //策略路由mytest应用
shutdown
no fair-queue
int s3/2
no ip addr
no ip directed-broadcast
shutdown
int s3/3
no ip addr
no ip directed-broadcast
shutdown
router eigrp 200
redistribute rip metric 100000 100 255 1 1500 //RIP路由重分发
network 192.168.0.0
router eigrp 100
passive-interface serial 3/2 //在serial 3/2 端口抑制路由更新理
network 10.0.0.0
distribute-list 6 out //过滤外向的更新，除了10.20.0.0
distribute-list 5 in //过滤传入的路由更新，只含192.168.1.0的路由
distance 100 192.168.3.0 0.0.0.255 //把EIGRP的管理距离调整至100
router ospf 200
redistribute rip metric 10 subnets //RIP路由重分发(包括子网)，10
redistribute eigrp 200 metric 5 subnets //EIGRP路由重分发(包括子网)5
network 172.0.0.0 0.255.255.255 area 0
router rip
redistribute eigrp 101 //EIGRP路由重分发
network 10.0.0.0
network 192.172.1.0
default-metric 5 //给EIGRP默认度量值5
ip classless
ip route 0.0.0.0 0.0.0.0 10.10.10.2
ip route 0.0.0.0 0.0.0.0 10.10.10.3
no ip http server
access-list 1 permit 67.2.21.5
access-list 5 permit 192.168.1.0
access-list 6 deny 10.20.0.0
access-list 6 permit any
access-list 101 permit tcp any any eq pop3
access-list 101 permit tcp any any eq smtp
access-list 120 permit tcp any any eq telnet
queue-list 5 protocol ip 1 tcp www //CQ 5的配置 HTTP流量分配到队列1
queue-list 5 protocol ip 2 tcp smtp //SMTP的流量分配到队列2
queue-list 5 default 3 //其它IP流量分配到队列3
queue-list 5 queue 1 byte-count 4500 //队列1的带宽为30%
queue-list 5 queue 2 byte-count 1500 //队列2的带宽为10%
queue-list 5 queue 3 byte-count 6000 //CQ5的配置 队列3的带宽为60%
priority-list 2 protocol ip high list 1 //PQ2的配置，来自67.2.21.5的IP流量被分配HIGH的优先级队列
priority-list 2 protocol ip medium tcp telnet //所有的telnet流量被分配medium的优先级队列
priority-list 2 protocol ip low tcp www //所有的telnet流量被分配medium的优先级队列
priority-list 2 protocol ip low tcp smtp //所有的SMTP流量被分配LOW的优先级队列
route-map mytest permit 9 //定义策略路由mytest
match ip address 120 //与ACL120定义的IP流量分配
set ip precedence flash //定义策略路由mytest的动作，IP流量优先级为flash
route-map mytest permit 20 //定义策略路由mytest
set ip precedence routin //定义策略路由mytest的动作，除ACL120之外的IP流量优先级为 routin
route-map mail permit 10 //定义策略路由mail
match ip address 101 //与ACL101定义的IP流量匹配
set interface serial 3/3 //定义策略路由MAIL的动作，应用到serial 3/3
加载中，请稍候......
加载中…