加载中…suse10操作系统bond双网卡绑定
(2011-11-21 09:30:13)
标签：
杂谈 |
相关文件配置如下 ：
linux-m698:/etc/sysconfig/network # more ifcfg-*
::::::::::::::
ifcfg-bond0
::::::::::::::
BOOTPROTO='static'
BROADCAST='10.1.248.255'
ETHTOOL_OPTIONS=''
IPADDR='10.1.248.240/24'
NETMASK='255.255.255.0'
MTU=''
NAME='Dell PRO/1000 MT Network Connection'
NETWORK='10.1.248.0'
REMOTE_IPADDR=''
STARTMODE='onboot'
UNIQUE='rBUF.bBSepP2NetB'
BONDING_SLAVE0='bus-pci-0000:06:07.0'
BONDING_SLAVE1='bus-pci-0000:07:08.0'
BONDING_MASTER='yes'
BONDING_MODULE_OPTS='mode=active-backup miimon=100 use_carrier=1'
USERCONTROL='no'
PREFIXLEN='24'
::::::::::::::
ifcfg-eth-id-00:14:22:0e:f2:ca
::::::::::::::
#BOOTPROTO='static'
#BROADCAST=''
#ETHTOOL_OPTIONS=''
BOOTPROTO='none'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='off'
USERCONTROL='no'
::::::::::::::
ifcfg-eth-id-00:14:22:0e:f2:cb
::::::::::::::
BOOTPROTO='none'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='off'
USERCONTROL='no'
::::::::::::::
ifcfg-lo
::::::::::::::
# Loopback (lo) configuration
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
IPADDR_2=127.0.0.2/8
STARTMODE=onboot
USERCONTROL=no
修改后，重新启动networkf服务
rcnetwork restart
测试 ： 可以顺序拔掉网线测试，客户端是否可以ping通
bond操作成功后，执行ifconfig -a | grep HWaddr命令 ，bond0、eth0、eth1的MAC地址应该是相同的
网卡的PCI-BUS编号：ethtool -i ethX 命令(X为网卡编号)查看相应网卡的PCI-BUS编号
cat /proc/net/bonding/bond0 命令可以查看当前网卡的切换情况：
linux-m698:/etc/sysconfig/network # cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth1
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth0
MII Status: up
Link Failure Count: 4
Permanent HW addr: 00:14:22:0e:f2:ca
Slave Interface: eth1
MII Status: up
Link Failure Count: 1
Permanent HW addr: 00:14:22:0e:f2:cb
喜欢
0
赠金笔
后一篇：Nodejs