甘肃L领导!32公斤强力功放,马兰士旗舰PM11S3已发出,尽情享受马兰士情迷天下之声!

标签:
pm11s3 |
分类: HIFI理论与经验hifi-theory |



甘肃省正处级领导L局,能为你服务是我的荣幸!恭喜你得到了马兰士旗舰功放
PM11S3,这是一台具有极高评价的,STEREOSOUND专家评语说可以干掉一般前后级的强力功放!的确如此!这台本体重量54斤,连外包装重量64斤的超级功放,具有强大无比的驱动力,他竟然可以把卡玛双9英寸低音的DB9驱动得虎虎生风!而且,他的内部还设有精心制作的唱头放大器,该 唱头放大器的音质足以让黑胶唱机发出非常优秀的声音!可以说,本机是绝对绝对绝对的好功放!今天由我亲自为你发出全新马兰士旗舰PM11S3,他会让你惊讶一点,在有如此强的驱动力的同时,能提供那么有格调的,好听的金碧辉煌的音色的功放,在这个价位我可以说,等于0!唯有马兰士PM11S3能将高超的驱动力与无比美妙的音色结合在一起,这实在是太难能可贵了!请好好享受吧!用本功放搭配B&W 805D3 第三代钻石喇叭的话,绝对的梦幻一样毒!
马兰士,B&W,我说了算,买马兰士SACD机,功放,买B&W钻石喇叭,联系我即可,手机或微信 139 175 64051
以下技术资料我的翻译供你参考

Exclusive HDAM Technology Delivers Exceptional Dynamic Range
Featuring separate phono and line level circuit boards, the PM-11S3 is equipped with our exclusive HDAM (Hyper Dynamic Amplifier Module) technologies, which provide superior low noise wide band performance in an all-discrete configuration, compared to conventional op amp ICs. The PM-11S3 incorporates no less than 40 HDAM SA3 latest generation modules, which feature ultra fast slew rate for true wideband response and maximum dynamic range, including multiple HDAM SA3 modules in the phono stage.
PM11S3具有完全独立的唱放线路与线性放大线路。采用马兰士独家的HDAM超级动态放大模块,具有超低的噪音超宽的频段,比一般功放采用的OP放大模块要优秀很多。PM11S3装备了40个HDAM SA3第三代模块,达到超高速的电压转换速率,带来真正的宽频与极大的动态,唱放线路也采用了HDAM SA3第三代模块进行设计。
Phono Input for Connections to Vinyl Record Players
The MM/MC phono section incorporates our latest Constant Current Feedback gain stage which features DC Servo equalization that eliminates the discontinuities in tonal balance caused by conventional RIAA equalization using ordinary dual band negative feedback topology, for the purest reproduction of your favorite vinyl recordings.
PM11S3的内置唱放部分是最新的电流反馈增益线路,比传统的负反馈要更为纯净,消除左右音调的不平衡,让你的黑胶唱机听起来比以往更好。
Robust Power Supply Supports Multiple Loudspeakers
Rated at 100 watts per channel into 8 ohms, the PM-11S3 features an extremely robust power supply and comparably rugged power amplifier output stages that together provide incredible low impedance drive capability, with a power output of 200 watts per channel into 4 ohms, easily able to drive virtually any audiophile loudspeaker with stability and utmost fidelity. The power supply features a massive 950 VA toroidal transformer wound with OFC (Oxygen Free Copper) for maximum headroom and operational stability, securely anchored to the chassis via its own solid metal sub-mounting plate which eliminates the possibility of transformer-induced vibrations. Instead of a conventional bridge rectifier, the PM-11S3 incorporates fast response, high current Shottky barrier diodes, which provide faster switching and lower voltage drop for a more pure DC output.
充足的电源供应足以驱动多单元大喇叭
PM11S3做了极致的电源供应,提供8欧100瓦,4欧翻倍200瓦的充足功率。可以对付大喇叭工作时的阻抗下跌。他可以轻松驱动任何市面上的喇叭达到高保真,高稳定度。装备了一个950VA的环形变压器,内部接线全部采用无氧铜,采用大量措施消除变压器的振动。








