加载中…
个人资料
hrdpbnzl8975
hrdpbnzl8975
  • 博客等级:
  • 博客积分:0
  • 博客访问:1,610
  • 关注人气:0
  • 获赠金笔:0支
  • 赠出金笔:0支
  • 荣誉徽章:
相关博文
推荐博文
正文 字体大小:

How To Make A Wooden Baby Cradle

(2012-06-01 12:01:19)
标签:

杂谈

How To Choose A Good Crib Mattress

How To Make A Wooden Baby Cradle
1

Find the center point at each end of the 2 inch-by-2 inch-by-36 inch lengths of hardwood. Drill a 1-inch deep hole within the center of each end of each and every piece. Coat inside of hole with 5-minute epoxy. Insert threaded rod into every single end of the wood.

2

Scribe a 24-inch arc across every rocker end from the cradle, parallel with the flat edge Furnishing a nursery bedding from the half circle. Drill a 1/4-inch hole 1 inch from the appropriate and left ends of the arc you just scribed, on each and every half circle. Connect rocker ends to the two inch-by-2 inch-by-36 inch hardwood lengths, inserting the threaded rods through the holes inside the rocker and capping them with brass acorn nuts.

3

Lay the 24 inch-by-36 inch sheet of plywood across the two inch-by-2 inch-by-36 inch bottom supports. Screw cradle bottom into place with 1-inch wood screws.

4

Lay cradle sides in placeHow to produce a Wooden Baby Cradle, adjusting side placement until the top edges of the sides will lie flush with the outer edge Click Here from the half circle from the rocker. Drill 1/8-inch-diameter pilot holes in each rocker end and inside the narrow end of each cradle side, and attach cradle sides using 1-inch brass wood screws.

5

Sand and stain cradle. Allow stain to dry overnightHow to create a Wooden Baby Cradle. Coat cradle with two to three layers of clear acrylic deck treatment and allow to dry for several days.


Related Article: How To Make A Wooden Baby Cradle

0

阅读 评论 收藏 转载 喜欢 打印举报/Report
  • 评论加载中,请稍候...
发评论

    发评论

    以上网友发言只代表其个人观点,不代表新浪网的观点或立场。

      

    新浪BLOG意见反馈留言板 电话:4000520066 提示音后按1键(按当地市话标准计费) 欢迎批评指正

    新浪简介 | About Sina | 广告服务 | 联系我们 | 招聘信息 | 网站律师 | SINA English | 会员注册 | 产品答疑

    新浪公司 版权所有