加载中…
个人资料
otfptfrd3819
otfptfrd3819
  • 博客等级:
  • 博客积分:0
  • 博客访问:1,465
  • 关注人气:1
  • 获赠金笔:0支
  • 赠出金笔:0支
  • 荣誉徽章:
相关博文
推荐博文
正文 字体大小:

How To Change A Belt On A Whirlpool Washing Machine

(2012-05-30 17:34:25)
标签:

杂谈

How To Change A Belt On A Whirlpool Washing Machine
1

Unplug the power cord with the Whirlpool washing machine from the energy outlet before attempting to replace the belt.

2

Turn off the water supply for the washing machine in the shut-off valves behind the washer, and disconnect the water lines at the washer with a crescent wrench.

3

Lay an old blanket on the floor in front from the washer, and lay the washer down on its face on the blanketHow to Change a Belt on a Whirlpool Washing Machine.

4

With a screwdriver, unfasten the screws on the rear service panel inside the back from the washer, setting the panel out from the way. Use a socket wrench to loosen the bolts that hold the motor towards the motor bracket.

5

Slide the motor towards the right to loosen the tension on the belt, and take the belt off the motor pulley. Slide the motor back to the left to gain access for the cam bar.

6

Advance the spin bar cam forwardHow to Change a Belt on a Whirlpool Washing Machine, sliding the spin control solenoid plunger up, and move the main drive pulley so the cam bar is set in the spin position.

7

Detach the brake yoke spring with a pair of pliers from the gear case cover, and use a socket wrench to take the three support braces off the base plate.

8

Detach the pump mounting bolts from the base plate, and use pliers to take the gear case mounting stud using the spacer off the base plate.

9

Locate the two remaining studs. Turn them seven times with pliers to loosen the studs, and take the yoke retainer off the yoke support by hand.

10

Slide the gear case down, slipping the belt out of the gear case pulley, and place the new belt Washing Machine Guide on the gear case pulley, sliding the gear case back up into position.

11

Use pliers to reattach and tighten the mounting studs. Use the socket wrench to connect the three support braces towards the base plate.

12

With the socket wrench, secure the pump mounting bolts Remove washing machine odor towards the base plate. Use pliers to connect the brake yoke spring for the base plate.

13

Move the spin bar cam into position, and slide the motor to the right on the bracket, placing the belt on the motor pulley. Move the motor back to the left to add tension towards the belt.

14

With the socket wrench, tighten the bolts holding the motor for the bracket, while continuing to apply tension for the belt. Use the screwdriver to fasten the rear service panel for the back from the washer.

15

Place the washer back up on its feet. Attach the water hoses for the back with the washer, and turn the water provide back on at the shut-off valves.

16

Plug the power cord from the Whirlpool washer into the energy outlet.

 

Posts Related How To Change A Belt On A Whirlpool Washing Machine



How To Remove & Replace The Front Cover Of A Maytag Washing Machine
How To Measure To Get A Washing Machine

0

阅读 评论 收藏 转载 喜欢 打印举报/Report
  • 评论加载中,请稍候...
发评论

    发评论

    以上网友发言只代表其个人观点,不代表新浪网的观点或立场。

      

    新浪BLOG意见反馈留言板 电话:4000520066 提示音后按1键(按当地市话标准计费) 欢迎批评指正

    新浪简介 | About Sina | 广告服务 | 联系我们 | 招聘信息 | 网站律师 | SINA English | 会员注册 | 产品答疑

    新浪公司 版权所有