加载中…
个人资料
helongshan
helongshan
  • 博客等级:
  • 博客积分:0
  • 博客访问:1,486
  • 关注人气:0
  • 获赠金笔:0支
  • 赠出金笔:0支
  • 荣誉徽章:
相关博文
推荐博文
谁看过这篇博文
加载中…
正文 字体大小:

dikesi

(2006-09-13 20:39:47)

vii) Do not damage electronic regulators during cleaning.

清洗时请注意不要毁坏电子调节器

viii) Glass bead cabinets used to clean electronic parts, i.e. regulators and rectifiers, need to be properly grounded to eliminate static electricity voltage spikes.

使用玻璃滚珠柜清洗电子部件,例如,调节器和整流器应很好的接地,以消除静电穿透。

B) Hardware五金部件

 

i) Reclaim hardware must be zinc dichromate plated and stress relieved with the exception of the items indicated below. All plated hardware must be inspected as defined in the Incoming Inspection Procedures to ensure that the stress relieving process was performed properly.

除下列说明外,回收的五金部件必须镀重铬酸锌并减轻压力。在随后的检验工序中镀件必须按规定检验,以保证减压工序的正确执行。

ii) Plating of stop collars, springs and lock rings is not permitted. Reclaiming of stop collars and lock rings can be accomplished by sand blasting the parts and chemically treating the parts to prevent oxidisation.

防滑垫圈、弹簧和锁环不允许电镀。防滑垫圈和锁环的翻新可以通过喷砂处理和防氧处理完成。

iii) Springs that can easily be sourced are to be replaced with new ones. Reclaim springs must not be sand blasted or plated. They must be cleaned in the vibratory cleaner only and chemically treated to prevent oxidisation. (An acceptable cleaning technique is by either hot water or solvent wash). All 5MT and 10MT solenoid springs must be replaced with new springs.

易得到的弹簧换成新的。再利用弹簧必须只能用振动清洗并防氧化处理,而不喷砂或电镀。(正确的方法是热水或清洗溶剂)。所有5MT10MT的电磁开关弹簧必须换成新的

 

C) Regulators调节器

 

i)                    Reclaim regulators may be used only when they are OEM or are produced by Dixie approved manufacturers. No other regulators may be used.

再利用的调节器必须是OEM或迪克斯指定的或厂家生产的。其他的调节器禁止使用。

ii) All reclaim regulators must be cleaned in a manner that does not generate static electricity (to prevent damage to electronic components). All reclaim regulators must be tested and conforming to specifications prior to release to the production area.

再利用的调节器应以不产生静电的方式清洗(防止电子部件被损

0

阅读 评论 收藏 转载 喜欢 打印举报/Report
前一篇:diksi
后一篇:dikesi
  • 评论加载中,请稍候...
发评论

    发评论

    以上网友发言只代表其个人观点,不代表新浪网的观点或立场。

    < 前一篇diksi
    后一篇 >dikesi
      

    新浪BLOG意见反馈留言板 电话:4000520066 提示音后按1键(按当地市话标准计费) 欢迎批评指正

    新浪简介 | About Sina | 广告服务 | 联系我们 | 招聘信息 | 网站律师 | SINA English | 会员注册 | 产品答疑

    新浪公司 版权所有